MNS 低壓抽屜柜的智能化技術改造

　　Intelligent technology transformation of MNS low-voltage drawer cabinet

　　柜體設計與智能分析系統：為適應數字工廠、智能化工廠對電氣控制系統的個性化要求，對 MNS 型低壓抽屜式開關柜進行智能化技術改造。

　　Cabinet design and intelligent analysis system: In order to meet the personalized requirements of digital factories and intelligent factories for electrical control systems, the MNS low-voltage drawer type switchgear has undergone intelligent technological transformation.

　　從開關柜柜體設計、傳感器安裝、控制系統原理等方面，結合系統原理設置智能分析系統，實現了開關柜可靠性、智能化升級。

　　From the aspects of switchgear cabinet design, sensor installation, control system principles, etc., combined with expert system principles, an intelligent analysis system has been set up to achieve the reliability and intelligence upgrade of switchgear.

　　傳感控制技術優勢：基于智能工廠的特性需求，分析總結了數種傳感控制技術的優勢。

　　Advantages of sensing control technology: Based on the characteristics and requirements of smart factories, several advantages of sensing control technologies have been analyzed and summarized.

　　在實例應用中，所提設計方案與傳統電控開關柜相比，其在巡檢周期、意外停機次數和年度人工成本方面的效益顯著。

　　In practical applications, the proposed design scheme shows significant benefits in terms of inspection cycle, number of unexpected shutdowns, and annual labor costs compared to traditional electronic control switchgear.

　　改進巡檢和維修方式：相關設計方案改進了傳統開關柜的巡檢、維修方式，對類似產品智能技術升級方面可起到一定的指導作用。

　　Improving inspection and maintenance methods: The relevant design scheme has improved the inspection and maintenance methods of traditional switchgear, which can provide guidance for the intelligent technology upgrade of similar products.

　　二、MNS 低壓抽屜柜的特點與應用

　　2、 Characteristics and Applications of MNS Low Voltage Drawer Cabinet

　　結構與連接方式：MNS 型低壓抽屜式開關柜通常包含多個抽屜層，由塵板分隔。每個抽屜層有兩個隔離的抽屜式功能單元，每個功能單元包括抽屜體、導軌和推進機構。

　　Structure and connection method: MNS type low-voltage drawer type switchgear usually includes multiple drawer layers separated by dust plates. Each drawer layer has two isolated drawer style functional units, each of which includes a drawer body, guide rails, and push mechanism.

　　導軌固定在塵板上，抽屜體與導軌配合。推進機構位于抽屜體下部，包括帶有弧形開口導槽的轉盤、上部帶有夾緊帽的樞軸、推桿、拉桿和安裝在塵板上的導向件。

　　The guide rail is fixed on the dust board, and the drawer body is matched with the guide rail. The propulsion mechanism is located at the lower part of the drawer body, including a turntable with an arc-shaped opening guide groove, a pivot with a clamping cap on the upper part, a push rod, a pull rod, and a guide installed on the dust plate.

　　獨立的單元電路：在這種低壓開關柜中，采用了更多的抽屜式功能單元，但體積并未增加。單元電路相互獨立，互不干擾，每個功能單元電路的斷開位置、試驗位置和接通位置之間的切換可以獨立完成。

　　Independent unit circuit: In this low-voltage switchgear, more drawer style functional units are used, but the volume has not increased. The unit circuits are independent of each other and do not interfere with each other. The switching between the disconnection position, test position, and connection position of each functional unit circuit can be independently completed.

　　三、MNS 低壓抽屜柜的事故分析與防范措施

　　3、 Accident analysis and preventive measures of MNS low-voltage drawer cabinet

　　母排三相短路事故：以某廠 MNS 型抽屜式低壓柜在試運行階段發生母排三相短路事故為例，對事故原因進行分析與排查，終確定為母排三相弧光短路造成放電。進而提出相應的處理方案和防范措施，以保證電力系統的穩定運行，并為以后類似事故提供借鑒與指導。

　　Bus three-phase short circuit accident: Taking the MNS drawer type low voltage cabinet in a certain factory as an example during the trial operation stage, the cause of the accident was analyzed and investigated, and it was finally determined that the discharge was caused by the bus three-phase arc short circuit. Furthermore, corresponding handling plans and preventive measures are proposed to ensure the safe and stable operation of the power system, and to provide reference and guidance for similar accidents in the future.

　　四、MNS 低壓抽屜柜的解決方案與未來展望

　　4、 Solution and Future Prospects of MNS Low Voltage Drawer Cabinet

　　智能監控系統的設計研究：基于系統的 MNS 型低壓抽屜式開關柜智能監控系統的設計研究，從多個方面實現了開關柜的智能化升級，為實現智能工廠打造重要一環。

　　Design and research of intelligent monitoring system: Based on expert system, the design and research of MNS low-voltage drawer type switchgear intelligent monitoring system have achieved the intelligent upgrade of switchgear from multiple aspects, which is an important part of building an intelligent factory.

　　工業以太網集成方案：從介紹智能生產出發，簡要分析 MNS DIGITAL 低壓開關柜解決方案及其應用，并展望工業以太網光明的應用未來。

　　Industrial Ethernet Integration Solution: Starting from the introduction of intelligent production, this article briefly analyzes the MNS DIGITAL low-voltage switchgear solution and its application, and looks forward to the bright future of industrial Ethernet applications.

　　本文由 山東MNS低壓抽屜柜 友情奉獻.更多有關的知識請點擊  http://766722.cn   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Electric For more related knowledge, please click http://766722.cn Sincere attitude To provide you with services We will gradually contribute more relevant knowledge to everyone Coming soon.